PUK 6 from Lampert – the jewelry welder

A comparison with its predecessors shows: 20 years of experience and passion in the development of jewelry welders have raised the features of the PUK 6 to an unprecedented level.

The PUK 6 is THE jewelry welder for every jewelry manufacturer, goldsmith, silversmith, watchmaker, jeweler and many more.

Welding on fittings, applying and repairing metal to edges and surfaces on jewelry and watches, fixing work, welding eyelets, closing pores, producing seams and much more is possible with the PUK 6. The PUK 6 also handles the welding of precious metals including silver, copper, bronze and all other weldable alloys as well as material thicknesses of less than 0.2 mm with ease.

Design

– Redesigned display with improved resolution

– Clear design language with timeless aesthetics as a visual highlight at any workplace, both in the workshop of goldsmiths and silversmiths and in the salesroom of jewelers

– Noble, selected materials for highest demands on value and appearance

Welding

– Up to 3.3 spot welds per second: up to 65% faster spot weld sequence

– More homogeneous, smoother spot welds – excellent weld even with variable spot spacing

– Higher heat input if required: Perfect results even with critical materials

– The new PUK 6 jewelry welders can produce 50% finer spot welds in the lower power spectrum.

– Minimum pulse duration now down to 0.1 ms: 67% shorter impulse duration in micro mode

Handpiece and electrode

– 20% faster and thus more agile electrode lifting

– Maximum electrode thickness now up to 1 mm

– Up to 50 % longer service life of the electrode

Average measured service life improvement in test setups, actual value depends on individual user profile

Operation

– 70% higher display resolution with increased viewing angle under all ambient conditions – real added value in the workshop for every goldsmith and silversmith

– Faster operation and material selection (gold, silver, platinum, palladium, copper alloys, titanium and more) through direct control with one-hand joystick with turn-push-tilt function

– Faster maximum spot weld sequence due to extended speed function – selectable in 3 levels

– Refined micro mode with tighter gradation enables extended spectrum when welding at the lower power limit

– New standby mode: Continuous availability with 85% lower energy consumption